|
| |
 Long before the term
"embedded controllers" was coined, MICROCode Consulting
was designing and developing such systems for specific customer projects.
Examples of prior systems
- Real-time data acquisition and display in a harsh environment
- Precision timing and display in a mobile battery-operated environment
- Specialized building alarm connected to internal computer network.
We directly sell one of our embedded controller systems: a TSD
Rally Clock.
How our experience can help you
- Multiple controllers
- MICROCode Consulting has used a variety of microcontrollers
and processors over the years and knows the benefits and deficiencies of each. We
will choose the unit that can best solve your needs: neither one that is too slow nor one
that is an expensive overkill.
-
- Multiple hardware and software architectures
- Maybe you have a simple engineering problem that involves time-critical sampling and
computation. Or perhaps a complex real-time multi-tasking multiple-interrupt system.
Chances are the best solution lies somewhere between these two. The best
hardware and software architecture to apply should fit the problem, which is why MICROCode Consulting does not try to make one solution fit all
problems.
-
- Multiple sensors
- It is a rare embedded controller that has no external sensors and interfaces. MICROCode Consulting has connected to a variety of sensors from
magnetic field strength to exhaust temperature, from spark firings to light pulses, from
voltage level to acceleration. Name it and we have probably done it.
-
- Multiple environments
- Few embedded controllers exist in a temperature-controlled low-humidity environment.
Whether in the harsh temperature and oily engine compartment of a car,
electro-magnetic sensitive cockpit of an airplane, or wet environment of a boat, MICROCode Consulting will package our units or help you package
yours to ensure operational readiness and reliability.
-
Start your design with us
Whether your company is experienced or new to embedded controllers, you can take
advantage of our knowledge and experience. At MICROCode
Consulting, your success is our primary concern. Rather than bringing our
experts in after you suffer a major problem, make us part of your team early in the design
phase and minimize your risk. Unlike typical consultants, we
share the risk. If we say it can be
done but we cannot deliver it to your satisfaction, we either complete it at no
cost or we substantially reduce your bill (as negotiated
up front)!
Contact us to find out how MICROCode Consulting can help you.
|
MICROCode
Consulting "The
way software should be written"